2147C Fletcher Ave Indianapolis, IN, 46203   800.897.8481   317.636.0751

Cleaners

Rutland Fireplace Glass Cleaner
Learn More

close

Rutland Fireplace Glass Cleaner

Use this safe, non-acidic formula to remove creosote, soot and grime from fireplace doors and hearths.
Contains No Ammonia
A. W. Perkins Fireplace Glass Cleaner
Learn More

close

A. W. Perkins Fireplace Glass Cleaner

Dissolves white film build-up and soot on glass-ceramic windows of gas or wood fired heating appliances. Very mild abrasive will not scratch glass-ceramics avoiding the micro-pitting of more aggressive products. This pitting leads to "hazy glass" and increases glass breakage.
SaverSystems ACS Home & Hearth Cleaner
Learn More

close

SaverSystems ACS Home & Hearth Cleaner

Home and Hearth Cleaner is an industrial strength cleaner. It is a high alkalinity citrus detergent, containing biodegradable surfactants which effectively cut through smoke and creosote. It safely removes smoke and creosote stains from fireplace glass, hearths, stoves, brick, stone, and more. Home and Hearth Cleaner combines the natural cleaning power of citrus with strong cleaning agents to tackle most tough household cleaning jobs. It is great for cleaning barbecue grills as well as clothing and equipment with smoke and soot. Home and Hearth Cleaner also works on walls, woodwork, kitchen surfaces and flooring and leaves no streaks or film. The product provides a quick easy way to clean while leaving a long-lasting scent of fresh oranges.
A. W. Perkins HearthGlass Creme
Learn More

close

A. W. Perkins HearthGlass Creme

Mild abrasive and active ingredients combine to attack soot and creosote deposits on glass-ceramic windows of solid-fuel stoves and fireplace inserts. Silicone creates a slippery layer to make the next cleaning easier.
Not for tempered glass fireplaces.
HY-C Soot Eraser
Learn More

close

HY-C Soot Eraser

Absorb soot, fly ash, and dirt on brick mantles, painted walls, woodwork and window blinds with this natural vulcanized rubber sponge.
Rutland Kwik-Shot™ Soot Stopper Stick
Learn More

close

Rutland Kwik-Shot™ Soot Stopper Stick

Just place one of these Kwik-Shot sticks on the fire to control soot and creosote build-up.
SaverSystems Cre-Away
Learn More

close

SaverSystems Cre-Away

By simply squeezing the 1 lb. bottle pointed directly up the flue near the top of the firebox, the powder is carried up the chimney coating the entire surface of the flue and enabling the ingredients to start working. It modifies third-degree creosote by converting it into a more brittle state. During the heating/cooling cycles the treated creosote loses its adhesive properties so it can be simply brushed away. Sprayer for use with 25 lb pail, sold separately.
SaverSystems Anti-Creo-Soot (ACS)
Learn More

close

SaverSystems Anti-Creo-Soot (ACS)

ACS is a non-toxic and environmentally safe liquid that attacks and destroys dangerous creosote and soot. Available in quarts or gallons. Encourage your customer to spray it daily into their fireplace or stove during low fire conditions. ACS will help prevent chimney fires and assist in cleaning the chimney more completely. It also controls excess ash and clogging in pellet stoves.
Rutland Stage One Creasote Remover
Learn More

close

Rutland Stage One Creasote Remover

Turns creosote into a brushable ash in pellet stoves, wood stoves, fireplace inserts and free-burning fireplaces. Makes chimney cleaning easier and reduces the danger of chimney fires. Safe to use with all types of chimneys.
Rutland TSR-Stage Two & Three Creosote Remover Bundle
Learn More

close

Rutland TSR-Stage Two & Three Creosote Remover Bundle

Dissolves baked-on creosote glaze after brushing with a flat wire brush. Reduces baked-on resins to loose, brushable ash without requiring heat. Once the flue is clean, apply Stage Two as a neutralizer. Sold and packaged as a set.
Rutland Brick & Stone Cleaner
Learn More

close

Rutland Brick & Stone Cleaner

Formulated to remove smoke residue, soot and creosote from masonry surfaces. Contains an industrial-strength solvent to dissolve buildup and a heavy-duty surface cleaner to penetrate and remove grime and greasy dirt. No dangerous acids.
For sealed surfaces only.
A. W. Perkins Big Stick Soot Remover
Learn More

close

A. W. Perkins Big Stick Soot Remover

A 3 oz. Toss-in tube containing soot and creosote removing compounds. Enhanced with the addition of our Magi-color Flame Crystals it burns with a blue-green flame.
Poultice Creosote Remover (PCR)
Learn More

close

Poultice Creosote Remover (PCR)

PCR should be used where glazed creosote is present in order to eliminate the dangers of chimney fires. PCR is designed to completely remove 3rd degree glazed creosote from flue tiles or stainless steel chimney liners. When applied, it dissolves and absorbs the creosote allowing it to fall off the sides of the flue tiles. Any remaining PCR can be easily removed by chimney sweeping or with a specially designed applicator tool.
Poultice Creosote Remover (PCR) and Applicator
Learn More

close

Poultice Creosote Remover (PCR) and Applicator

Applicator Package Includes:
  • 1 RS 44 Pulling head
  • 1 Pulling head connector kit
  • 1 12"x12" foam cut w/bottom plate
  • 1 8"x12" foam cut w/bottom plate
  • 1 8"x8" foam cut w/bottom plate
  • Requires use of a winch system.
SaverSystems Brick & Mortar Cleaner
Learn More

close

SaverSystems Brick & Mortar Cleaner

Designed for use on brick and masonry surfaces. It eff ectively removes smoke, rust, and creosote stains, as well as mildew and algae. Available in a 2.5 gal container, covers 50-150 sq ft per gallon.
SaverSystems Paint "N" Peel Fireplace Cleaner
Learn More

close

SaverSystems Paint "N" Peel Fireplace Cleaner

Paint on/Peel off . Cleaning smoke stains from your customer's fireplace front is just that easy. Now you can add cleaning smoke/ soot stained fireplace fronts to your list of professional services. You paint it on and once dry, your customer peels it off . Their old, dingy fireplace front looks like new and there's no need for a return trip. The average job requires less than a gallon of Paint "N" Peel Fireplace Cleaner.
  • Restores the appearance of nearly all masonry surfaces.
  • Waterless–Simply paint on, let dry, and peel off.
  • No noxious odors, no harsh chemicals.
  • Tools clean easily with soap and water.

Clean Out Doors & Grates

Minuteman Cast Iron Door
Learn More

close

Minuteman Cast Iron Door

Made of heavy duty cast iron, this door displays a glowing fire on its exterior. There are three sizes available:
  • 8" x 8" Outside Dimensions = 10 1/2" x 10 1/2"
  • 8" x 12" Outside Dimensions = 11" x 17 1/2"
  • 12" x 12" Outside Dimensions = 15 1/2" x 15 1/2"
Ahrens Masonry Door
Learn More

close

Ahrens Masonry Door

This concrete constructed door is made to be mortared into a masonry opening. It has a gravity lock door that is opened by just lifting and pulling out. Two sizes are available:
  • Small Inside Dimensions = 5" W x 7" Ht, Outside Dimensions = 73/8" W x 10 1/2" Ht
  • Large Inside Dimensions = 9" W x 10" Ht, Outside Dimensions = 115/8" W x 15 3/4" Ht
Lyemance Cast Aluminum Door
Learn More

close

Lyemance Cast Aluminum Door

Light weight door, not recommended for smoke chambers. Available in:
  • 8"x 8" Outside Dimensions = 10 1/2" x 10 1/2"
  • 8"x 12" Outside Dimensions = 10 7/8" x 15 5/16"
  • 12"x12" Outside Dimensions = 15 5/16" x 15 5/16"
Ashpit Door
Learn More

close

Ashpit Door

Drop this cast iron door in the bottom of your customer's fireplace so they can sweep away their ashes. Fits 4.5" x 9" opening, outside dimension is approx. 53/8" x 91/2".
HY-C Fireplace Grates
Learn More

close

HY-C Fireplace Grates

One piece cast flat bottom style grate with 12" depth, 5" height for use in small fireplaces and Franklin Stoves.
HY-C Safe-T-Grate
Learn More

close

HY-C Safe-T-Grate

Heavy duty self-feeding expandable fireplace grate. Safe-T-Grates are shipped knocked-down.

Cements

IPC Furnace Cement
Learn More

close

IPC Furnace Cement

A great way to bond metal to metal, metal to masonry, or masonry to masonry. When applied properly it resists shrinking, cracking, and sagging. This is a pre-mixed cement, gray in color, available in a 2 gallon bucket. Apply it up to 1/4" maximum thickness, withstands temperatures to 3000°F. Can be applied at temperatures below 32°F.
Rutland Refractory Cement 611
Learn More

close

Rutland Refractory Cement 611

Pre-mixed cement for masonry to masonry repairs 1/8" to 1/4" thick. Use to set, coat or repair firebrick in fireboxes. Temperature rating: 2000°F. Requires heat to cure. Buff color, may be painted once heat cured.
Rutland Castable Refractory Cement 601
Learn More

close

Rutland Castable Refractory Cement 601

Dry Mix cement, just add water. Sets and dries as hard as firebrick. Use to cast custom shapes, replace worn-out firebrick or fill large holes in masonry firebox or as a solid stone bed. May also be used to build or repair outdoor fire pits. For outdoor use, temperature rating: 2200°F. Does not require heat to cure, minimum 24 hr dry time. Tan color, may be painted when dry. 12 1/2 lbs casts a block 12" x 12" x 1 1/2".
Rutland Black Furnace Cement
Learn More

close

Rutland Black Furnace Cement

This pre-mixed cement has been the benchmark Furnace Cement for over 90 years. Seals joints smoke and gas tight. Use to bond and seal metal to metal or masonry to metal joints under 1/8" or to install or reset furnaces or oil burners. Temperature rating: 2200°F. (Does not contain asbestos.) Requires heat to cure, may be painted once heat cured.
Rutland Dry Mix 211
Learn More

close

Rutland Dry Mix 211

Dry mix cement, just add water. This refractory mortar mix meets or exceeds all the requirements of the NFPA. Use to join or repair masonry flue tile or as a parge coating for building fireboxes and building masonry flue liners. Coverage: 10 lb covers 1,268 sq. in. 1/8" thick or 50 clay tiles. Temperature rating: 2550°F. Not for outdoor use. Does not require heat to cure. Acid resistant. Dark gray color, may be painted once dry.
Rutland Stove Gasket Cement 77
Learn More

close

Rutland Stove Gasket Cement 77

The original. Use to Adhere all types of gasket materials to airtight stoves and make metal to metal or metal to masonry repairs. Temperature rating: 2000°F. Requires heat to cure. Black.
Ahrens Chamber-Tech
Learn More

close

Ahrens Chamber-Tech

This is an outstanding smoke chamber parging mix. A 30 lb. container will cover 4 sq/ft at 1 ½" thickness. Just mix with a small amount of water, use a mixing paddle.
Super 3000 Cement
Learn More

close

Super 3000 Cement

A premium quality super duty grade mortar which has become an industry standard. Use this to bond masonry to masonry, to set firebrick or parge new smoke chambers. This is an air/ heat setting mortar that can withstand temperatures up to 3000°F. Super 3000 cement covers an average of 5 sq. ft. per gallon when applied at 1/8" to ¼" thickness. Available in two types, Parging is thicker, containing grit and Troweling has a brick setting consistency.

Sealants

Rutland Stove Gasket Cement 77E and 78
Learn More

close

Rutland Stove Gasket Cement 77E and 78

The perfect easy squeeze cement for quick gasket repairs. Use to adhere fiberglass gasket to cast iron and steel. Temperature rating: 2000°F. Requires heat to cure. Black.
Rutland Fireplace Mortar 63, 63B, 63G
Learn More

close

Rutland Fireplace Mortar 63, 63B, 63G

Once fire cured, fireplace mortar is as strong as the firebrick itself. Use to patch fireplace fireboxes, bond firebrick to firebrick and re-point fireplace brick in the firebox. Temperature rating: 2000°F. Requires heat to cure, may be painted once heat cured.
HeatShield Cerfractory Foam Smoke Chamber Sealant
Learn More

close

HeatShield Cerfractory Foam Smoke Chamber Sealant

Repairs masonry smoke chambers easily. No need to remove the damper or flue tiles. Greatly improves draft efficiency while adding an extra layer to insulate the chimney from surrounding building materials. Applies with a basic sprayer. Exceeds ASTM & NFPA requirements. 20-Year limited warranty. Average smoke chamber requires 1-2 pails.
HeatShield Adhesion Promoter
Learn More

close

HeatShield Adhesion Promoter

HeatShield Adhesion Promoter is a liquid additive. Add to HeatShield Cerfractory Flue Sealant or HeatShield Cerfractory Foam upon mixing to further promote adhesion/bonding to flue tiles and masonry surfaces. Because the interior surfaces of masonry chimneys and fireplaces are often difficult to clean and prep, the use of HeatShield Adhesion Promoter ensures maximum bonding potential.
HeatShield Tie Coat Accelerator
Learn More

close

HeatShield Tie Coat Accelerator

Tie Coat Accelerator is added to each 50 lb. bucket of HeatShield Cerfractory Flue Sealant to reduce the drying time of the tie coat application, allowing you to perform the resurfacing repairs sooner and save time on the job.
HeatShield Formula 51
Learn More

close

HeatShield Formula 51

HeatShield Formula 51 is an insulating, high-temperature refractory mortar, developed specifically for parging smoke chamber walls. When properly applied, it will restore the integrity of your fireplace. This product will insulate, seal gaps, and smooth the smoke chamber walls as required by both NFPA and IRC codes. Formula 51 can be parged, troweled, or hand-packed over any brick, block, or stone surface exposed to high temperatures such as smoke chambers, ash pits, vent connections, and more. Formula 51 meets and or exceeds all of the national and local building codes for new construction and repairs of masonry fireplaces and chimneys. Not suitable for food storage or food preparation areas. Meets ASTM C-199 (Medium Duty) and is non-water-soluble when dry.
HeatShield Smoke Chamber Sprayer
Learn More

close

HeatShield Smoke Chamber Sprayer

This dual-guage smoke chamber sprayer is a low pressure, high volume system with a 3/4" hose. It gives users more control for applying the correct amount of material for various smoke chambers. The spray gun, made by MarshallTown can be adjusted to 7 different spray settings and includes a clean-out valve on top for easy cleanup. The sprayer must be used with a compressor with a minimum 5.0 CFM @ 60 PSI.
Chamber Safe
Learn More

close

Chamber Safe

Chamber Safe is a high performance, refractory parging material designed to strengthen, streamline, and restore the critical smoke chamber area in masonry chimneys. Chamber Safe smooths jagged, corbelled walls typically found in the smoke chamber, and creates a smooth transition between the smoke chamber, and flue liner.
M-FLEX Silicone Sealant
Learn More

close

M-FLEX Silicone Sealant

Use our clear, black, or gray RTV silicone to seal fireplace inserts, stoves, or flashings. They are heat resistant to 400°F RTV. Red silicone is heat resistant up to 500°F, 650°F intermittently. Adheres to glass, metal, most plastics, fiberglass, aluminum, wood, brick, and slate. Also prevents corrosion to copper or galvanized chimney flashings.
National Chimney Chimney Top Adhesive
Learn More

close

National Chimney Chimney Top Adhesive

10.5 oz cartridges, used to secure multi-flue caps to the crown. Exterior use only.
Concrete and Masonry Patch
Learn More

close

Concrete and Masonry Patch

A weather-resistant mortar and patching material for use in repairing broken mortar in chimneys, steps, windowsills, sidewalks and foundations. May be applied at temperatures below freezing if cartridge is warmed for gunning. Dries to a hard, tough weatherresistant finish in a natural concrete color.
No. 7 Wet or Dry Roof Patch
Learn More

close

No. 7 Wet or Dry Roof Patch

All weather formula promotes adhesion and sealing to asphalt, composition, metal roofing and masonry surfaces. Use to patch worn roofing, seal flashing, gutters, downspouts and eaves. Seal around ventilators and skylights. Use around cornices and roof edges.
SaverSystems Crack & Joint Sealant (Formerly CrackMagik)
Learn More

close

SaverSystems Crack & Joint Sealant (Formerly CrackMagik)

Stop leaks through brick and mortar with Crack & Joint Sealant. This brushable sealant seals cracks up to 1/8" wide on brick faces and at mortar or brick joints. It dries to a clear, translucent milky film in several hours and cleans up easily with soap and water. One half gallon container will treat mortar joints surrounding approx. 550 standard size bricks or approx. 100 sq. ft. of wall surface.
SaverSystems FlashSeal
Learn More

close

SaverSystems FlashSeal

With a universal opening for all vipers, this is used to clean creosote build-up. Available in VA crimped stainless steel wire, PEK, and perlon bristles. The VA crimped star has "wavy" stainless wire bristles; therefore, it is not recommended for use on stainless steel liners. PEK and perlon stars are made of a rigid plastic material.
SaverSystems CrownCoat Brushable Sealant
Learn More

close

SaverSystems CrownCoat Brushable Sealant

This crown repair product is the brush-on version of CrownSeal. Using a 3" or 4" bristle paint brush, brush a thin coat over the entire crown, wait a few minutes for a tacky film to form, then brush on a second heavier coat. CrownCoat cures completely within 2 - 4 hours and is available in a 2 or 5 gallon container. This will cover approximately 80-200 sq. ft. or 40 sq. ft. per gallon. Available in standard color (very light Gray) or Buff, a color more resembling concrete.
PMP: Premier Mortar Preserve
Learn More

close

PMP: Premier Mortar Preserve

Flexible crown repair designed for use over exterior masonry, stuccos, poured concrete, pre-cast concrete, and concrete block. It forms a continuous seamless coating that preserves the crown. Apply 1/16" thickness over the entire crown. Within 1 hour it should be tack free, weather resistant in 6 hours and cured completely in 72 hours. Gray in color. (5 gallon container yields 100 - 130 sq. ft.)
SaverSystems CrownSaver
Learn More

close

SaverSystems CrownSaver

Use this durable waterproofer for the repair of Chimney Crowns. It covers approximately 30 square feet at ½" thickness (about 4 average crowns) when properly mixed. This product allows you to re-build and waterproof all at once. Option: can be used with form foil.
SaverSystems CrownSaver
Learn More

close

SaverSystems CrownSaver

This pre-mixed crown repair system forms a light gray, flexible, waterproof seal to protect the chimney crown. It is applied to the surface with a trowel or putty knife at a thickness of 1/8" - 1/4" (1/4" thickness yields 7-9 sq. ft. per gallon of coverage). Cures completely in 6-8 hours during warm weather or 24-72 hours in cooler weather. CrownSeal is available in 2 and 5 gallon containers.
SaverSystems Cold Weather CrownCoat Sealant™
Learn More

close

SaverSystems Cold Weather CrownCoat Sealant

Cold Weather CrownCoat is a tough elastomeric coating that will cure in temperatures below freezing. This stops further water damage, even in the winter months. Cold Weather CrownCoat is available in 1 gal pails – enough to do 3-4 average crowns. Light gray color.
Chimney Saver Siphon Pump
(for 30 gal)
Call 1.800.897.8481
SaverSystems Powdered Water Repellent
Learn More

close

SaverSystems Powdered Water Repellent

Just add 1 oz to every 15 lbs. of dry mortar mixture, then add water. Provides water repellent properties when the concrete and mortar cures.
SaverSytems ChimneySaver Water Repellent
Learn More

close

SaverSytems ChimneySaver Water Repellent

The most common problem with masonry chimneys is water penetration. Saver Systems water repellent can prevent all types of water damage, such as staining, loss of insulation value, freeze-thaw damage, deterioration, and ultimately structure failure. Available in Water or Solvent base including V.O.C. Compliant Solvent-base. Product is covered by a 10-year warranty. Covers approx. 100 sq. ft. per gallon.
Multi-Purpose ChimneySaver Water Repellant
Learn More

close

Multi-Purpose ChimneySaver Water Repellant

New Multi-Purpose Water Repellent can be used on a variety of substrates as well as on horizontal applications. Up to 1/4" penetration, creates a salt shield barrier on concrete, resistant to de-icing chemicals, 100% breathable, VOC compliant.

Vaccums

1 Motor Vac with Removable Drum A. W. Perkins
Learn More

close

1 Motor Vac with Removable Drum A. W. Perkins

The 1 Motor RoVac is powerful yet light at under 20 lbs. This handy vac comes with a standard 3" x 12 ft hose & 1 ½" hose and accessories. Great for stove and fireplace servicing, now with a new 2-stage motor rated 110" CFM and 122" water lift. Its new SootStop pre-filter and MicroBag filter stops 99% of dust, and the HEPA filter stops what does get through. It rolls on (5) non-marking casters or can be carried. Exterior shell is available in plastic or stainless steel. Includes:
  • SootStop dacron pre-filter
  • micro coated filter
  • HEPA cartridge filter
  • 3"x12' heavy duty gray hose with swivel connector
  • 1 ½" x 8 ft hose with swivel connector and (2) 18" extension wands
  • 1 ½" accessories (tool adapter, brush, crevice & floor tools)
  • 4" x 10' heavy duty dust hose with wear strip.
3 Motor Vac with Fixed Plastic Drum A. W. Perkins
Learn More

close

3 Motor Vac with Fixed Plastic Drum A. W. Perkins

Use one, two, or all three motors depending on the vent size and air flow need with the 3 Motor RoVac. Rated at 405 CFM and 70" water column suction, this vaccuum is pound for pound the most powerful vacuum available, yet quiet at only 78 db. It provides extraordinary dust collection as well as unmatched debris pickup. The new SootStop dacron prefilter may be used to stop 98% of debris and is essential for servicing of oil or coal flues. Its large, washable micro coated bag filter stops almost all the rest of the particles in a typical dust stream, the tiny amount remaining is stopped by the HEPA filter.

You can get your 3 Motor vacuum with a removable tank on a cart or with a fixed trolley, in either case they have 12" rear wheels (with lifetime warranty) and locking 5" front casters.

Includes:
  • SootStop dacron pre-filter
  • micro coated filter
  • HEPA cartridge filter
  • 3"x12' heavy duty gray hose with swivel connector
  • 1 ½" x 8 ft hose with swivel connector and (2) 18" extension wands
  • 1 ½" accessories (tool adapter, brush, crevice & floor tools)
  • 4" x 10' heavy duty dust hose with wear strip.
3 Motor Vac with Removable Stainless Steel Drum A. W. Perkins
Learn More

close

3 Motor Vac with Removable Stainless Steel Drum A. W. Perkins

Use one, two, or all three motors depending on the vent size and air flow need with the 3 Motor RoVac. Rated at 405 CFM and 70" water column suction, this vaccuum is pound for pound the most powerful vacuum available, yet quiet at only 78 db. It provides extraordinary dust collection as well as unmatched debris pickup. The new SootStop dacron prefilter may be used to stop 98% of debris and is essential for servicing of oil or coal flues. Its large, washable micro coated bag filter stops almost all the rest of the particles in a typical dust stream, the tiny amount remaining is stopped by the HEPA filter.

You can get your 3 Motor vacuum with a removable tank on a cart or with a fixed trolley, in either case they have 12" rear wheels (with lifetime warranty) and locking 5" front casters.

Includes:
  • SootStop dacron pre-filter
  • micro coated filter
  • HEPA cartridge filter
  • 3"x12' heavy duty gray hose with swivel connector
  • 1 ½" x 8 ft hose with swivel connector and (2) 18" extension wands
  • 1 ½" accessories (tool adapter, brush, crevice & floor tools)
  • 4" x 10' heavy duty dust hose with wear strip.
Rutland August West SootSweeper II®
Learn More

close

Rutland August West SootSweeper II®
 
  • The most powerful vacuum for controlling dust.
  • Exchanges all the air in an average room in 2 minutes.
  • Moves air 7 to 10 times more effectively than an industrial vacuum.
  • The filter holds the smallest particles and has a huge capacity.
A SootSweeper II is the only vacuum on the market made solely for chimney sweeps to control dust. When the big 4" diameter hose is placed inside a fireplace and the switch turned on, all the air in the fireplace is drawn into the machine. Air from the room rushes into the fireplace to fill the vacuum created and due to the natural draft of the chimney. Air cannot come down the shaft. All the clouds of dust created by the cleaning just swirl around a few seconds and then disappear into the SootSweeper hose. Two year warranty on the motor, one year on the remaining parts.

Specifications:
Dimensions: 40" H x 20" W
Weight: 85 lbs.
Hose: 4" x 10'
Motor: 2 H.P. Single Phase, 15v, 115 amps, 7500 RPM
Fan: 100 MPH wind load 350 CFM, 8000 ft per minute air velocity
Filter: 30,528 sq in, pleated, non-woven precharged, 99.9% efficient on particles as small as 0.5 microns.
Rutland August West SootSweeper II® Filter:
Call 1.800.897.8481
TurboSweeper®
Learn More

close

TurboSweeper®
 
  • Perfect companion to the SootSweeper II.
  • Exchanges all the air in an average room in 2 minutes.
  • Pick up large pieces as well as small soot particles.
  • Use in oil and gas flues, smoke shelves, and in fireboxes.
It is engineered to take the abuse from the constant daily use. The high-density polyethylene body is compact and is dent and rust proof. The crush-proof 1 ½" vinyl hose is a generous 10' long with molded vinyl cuffs. The supplemental ⅞" x 4' metal hose attaches to reach those annoying soot filled crevasses and cracks. The hose has a positive-locking fitting that smoothly swivels 360°. The motor will not overheat if there is any blockage. The three latches are wide, which gives them long lasting strength and they seal the motor head securely to prevent dust from escaping. Five year warranty on the tank, two years on the motor, and one year on the remaining parts.

Specifications:
Dimensions: 26" H x 16" dia
Weight: 27 lbs.
Hose: 1 ½" x 10' vinyl and ⅞" x 4' metal
Motor: 1 HP, self-cooling
Lift: 86"
Tank: 6 gal, high-density polyethylene
Filter: Dacron bag prefilters, capturing particles as small as 5 microns. The pancake filter provides greater filtration.
TurboSweeper® Pancake Filter:
Call 1.800.897.8481
TurboSweeper® Dacron Filter Bag:
Call 1.800.897.8481

Safety

Safety 3MTM Half Face Respirator
Learn More

close

Safety 3MTM Half Face Respirator
 
  • Made of silicone for greater comfort and helps provide a softer feel on the face.
  • 3M™ Cool Flow™ Exhalation Valve allows easy exhalation for cool, dry comfort; and designed to be long lasting.
  • Used with filters below to help protect against dust, gas and vapor.
3M™ Full Face Respirator
Learn More

close

3M™ Full Face Respirator
 
  • Lightweight design with silicone face seal enhances comfort and improves durability.
  • Wide field of vision
  • Available in four different modes; can be used with both negative and powered and supplied-air systems
  • Used with filters below to block 100% particulates (dust and soot), gas, and vapor.
Retainer to Hold Filter Cartridge
Call 1.800.897.8481
Filter Particulate
Call 1.800.897.8481
Organic Vapor Cartridge
Call 1.800.897.8481
Head Sock
Learn More

close

Head Sock

Keep your head and neck clean with this 7" knit head sock.
Soot Suit
Learn More

close

Soot Suit

These Tyvek Coveralls provide a durable, comfortable, impenetrable barrier against many hazardous particulates, including asbestos fibers and lead dust. Tear resistant and low linting with a full front zipper, attached hood, elastic wrists and ankles. XXL.
Coveralls
Learn More

close

Coveralls

Kimberly-Clark KLEENGUARD™ Coveralls. Made of patented MICROFORCE™ barrier fabric, these coveralls have superior particle holdout while allowing excellent breathability. They offer high durability, have more chest room, longer body length and are antistatic. Zipper front, elastic back, wrists, ankles and hood, size XL.
Gloves & Booties
Learn More

close

Gloves & Booties

Essential for working safely on uneven surfaces. Level a ladder in seconds with unlimited adjustment positions. Simply squeeze spring loaded locking plates, then allow the leg to extend or retract. Optional replacement feet kit contains (2) rubber feet, (2) metal locking caps and screws.
A. W. Perkins Chimfex Fire Suppressant
Learn More

close

A. W. Perkins Chimfex Fire Suppressant

Chimfex is indispensable as the first line of defense in controlling a fire in a chimney. An independent test lab reports that it suppresses a fire in an average of 22 SECONDS! It is an easy to use and effective means in controlling a chimney fire without water damage. Toss it alongside the fire, close the door and air intake vents, and the smoke emissions from Chimfex will rise up the flue to replace the oxygen. Use in a wood stove, fireplace or insert.
Rug Runner
Learn More

close

Rug Runner

Protect floors from extremely dirty traffic with this washable 4' by 12' natural color heavy canvas rug runner.
Drop Cloths
Learn More

close

Drop Cloths

Available in natural and heavy duty black. Black cloth for dry use only, can fade when wet.
Code Book
Learn More
AirJet Chimney Housing Kits
Call 1.800.897.8481

close

AirJet Chimney Housing Kits

The following kits include:
  • High Grade, Polished, Stainless Steel, Square Top Cap
  • 4 Side Panels
  • Simulated Red Brick
  • Galvanized 2 piece Roof Flashing
  • 18" Telescoping Aluminum Connector
These kits will fit the AirJet Gas Systems in 5", 6" or 7". Square Top Cap is UL approved for use with gas or oil. With only 8 parts the entire unit can be assembled on the ground and attached.

Sales Tools

Inspection Reports
Learn More

close

Inspection Reports

With these inspection reports you can record valuable information regarding your homeowner's appliances, stoves, fireplaces, and chimneys. It has three copies - one for your homeowner and two for you.
Liner Sizing Charts
Call 1.800.897.8481
Brochures
Learn More

close

Brochures

Brochures:
National Chimney M-FLEX Brochure (25/pk)

National Chimney Premier Cap Brochure (50/pk)

National Chimney Smoothwall Brochure 25/pkg

National Chimney Refractory Panel Brochure (50/pk)

National Chimney Chase Cover Brochure (50/pk)

National Chimney Multi Panel Brochure (25/pk)

National Chimney M-Flex Pre-Insulated Liner Brochure (50/pk)

National Chimney Premier Mortar Preserve Brochure (100/pk)

National Chimney Premier Stackable Single Flue Caps Brochure (50/pk)

National Chimney Premier Damper Cap Brochure (50/pk)