2147C Fletcher Ave Indianapolis, IN, 46203   800.897.8481   317.636.0751   Facebook   Twitter

Rods

A. W. Perkins Black Poly Rods "Buttonflex" - with Buttonlok™ Ends
Learn More
A. W. Perkins Black Poly Rods "Buttonflex" - with Buttonlok™ Ends

These tried and true rods are available in many lengths and two diameters. The 2 foot version is used with the Smoke Chamber spin brush. The 3/4" diameter x 3 foot long rod is good as a more flexible leader rod or to use for smaller diameter stove and insert flues where the added stiffness is unnecessary. The 7/8" rods are stiffer to traverse longer distances or to deliver torque to the whip in larger flues without flopping around like more flexible rods.
A. W. Perkins Fiberglass ButtonLok™ Chimney Brush Rods
Learn More
A. W. Perkins Fiberglass ButtonLok™ Chimney Brush Rods

Rods are .440 and .480 diameter. The rods are for use with Heavy Duty ButtonLok™ brushes. Adapters to convert old rods are available. Not for use with our drill adapter; these rods could shatter.
A. W. Perkins Steel Enforcer™
Learn More
A. W. Perkins Steel Enforcer™

These rods are used for rotary deglazing and tile breaking. Use with our chain or cable whips or with one of our tile breakers.
A. W. Perkins 1/2" Superflex Nylon Rods
Learn More
A. W. Perkins 1/2" Superflex Nylon Rods

Both items are solid white rods used for stove and insert chimneys up to 8". The economical Superflex Nylon Rods are available in 3' and 5' lengths with enough flexibility to use through thimbles and clean out doors. New Slick rods are the same flexibility but the plastic is slippery, so there is less friction when multiple bends are encountered. The material also takes heat and cold better giving them a longer life and much improved cold weather performance. Slick Rods available in 3' length only. Used most frequently with Mini-Medusa, AWP7260.
A. W. Perkins Size 3/4" x 3' Solid Nylon "Slick" Rod
Learn More
A. W. Perkins Size 3/4" x 3' Solid Nylon "Slick" Rod

For tile breaking and deglazing operations. Use instead of steel rods, as they have minimal flex. And the larger size is easier to handle than steel rods. (With crimped on fittings.)
Rutland Fiberglass Rods
Learn More
Rutland Fiberglass Rods

  • Black Fiberglass Rods
    Commercial grade, heavy duty, black, .440" Dia. Fits Master Sweep™ chimney brushes. Note: not for spinning.
  • Yellow Fiberglass Rods Commercial grade, super duty, yellow .480" Dia. Fits Master Sweep™ Chimney Brushes.
  • ProFlex™ Poly Rods Super flexible polypropylene, choose for cleaning from below and when going through sharp bends, offsets, breeches or thimbles. Rust-proof fittings fit flush with rod. Not for spinning.
  • ProKleen™ Steel Rods
    When steel rods are used with a 1/2" electric drill, the TLC fittings insure tools may be rotated in either direction without separation.
Rutland Proflex™ Poly Rods with 3/8" Thread & Torque Lock Connection
Call 1.800.997.8481
Rutland ProKleen™ Rod with Torque Lock Connection
Call 1.800.997.8481
Rutland 2" ProKleen™ Starter Rod
Call 1.800.997.8481

Rod Adapters & Accessories

A. W. Perkins Universal Thread
Call 1.800.997.8481
A. W. Perkins 3/8 Pipe Thread
Call 1.800.997.8481
A. W. Perkins Viper
Call 1.800.997.8481
A. W. Perkins Drill 3/8"
Call 1.800.997.8481
A. W. Perkins Chuck 1/2"
Call 1.800.997.8481
A. W. Perkins Pro-Kleen
Call 1.800.997.8481
A. W. Perkins Power Whip
Call 1.800.997.8481
A. W. Perkins Female Socket (3/8 NPT quick connect)
Call 1.800.997.8481
A. W. Perkins Male Plug (3/8 NPT quick connect)
Call 1.800.997.8481
A. W. Perkins Quick Connect Female Socket Plug (3/8 NPT quick connect)
Call 1.800.997.8481
A. W. Perkins 3/8" NPT Adapters
Call 1.800.997.8481
Rutland 3/8" female/TLC female
Call 1.800.997.8481
Rutland 3/8" male/TLC male
Call 1.800.997.8481
Rutland ProFlex™ male/TLC female
Call 1.800.997.8481
Rutland ProFlex™ female/TLC male
Call 1.800.997.8481
Rutland ProKleen™ male/TLC female
Call 1.800.997.8481
Rutland ProKleen™ female/TLC male
Call 1.800.997.8481
Rutland 1/4" Female to 3/8" Female Reducer adapter
Learn More
Rutland 1/4" Female to 3/8" Female Reducer adapter
Use to connect 3/8" NPT rods to tools with 1/4" fittings.
Rutland Nest Claw
(Attaches to nylon rods)
Call 1.800.997.8481
Rod Caddy
Learn More
Rod Caddy

Carry your chimney rods, attachments, tools and small brushes in these caddies. Available as hard tube (open or closed cover) or soft cases in a variety of lengths.
Nylon Bag
Call 1.800.997.8481

Brushes

A. W. Perkins Medusa Super Scrub Power Sweeping Whip
Learn More
Medusa Super Scrub Power Sweeping Whip

A totally new construction whip for rotary power sweeping of chimneys using the large ButtonLok™ connector with 11 strands of .155" diameter shark tooth whip line. The Super Scrub Whip is unsurpassed for cleaning chimneys gently yet effectively. Passes through dampers easily then expands out to scrub the flue removing soot and flaky creosote. It's easily adjusted to give just the right amount of scrubbing. The guide ball on front helps negotiate offsets.
A. W. Perkins Cable Whip
Learn More
A. W. Perkins Cable Whip

The A. W. Perkins cable loop with ButtonLok connector is used when power sweeping glazed masonry chimneys. Unlike other loops, it can be restrung with cable sourced locally. A 6' cable makes a 14" loop, and 12' makes a 24" loop.
A. W. Perkins Stinger Whip
Learn More
A. W. Perkins Stinger Whip

Use this .155" diameter line for fast rotary cleaning of soot or dry creosote deposits. Tips get into corners of flues up to 12" x 12" (part of the ButtonLok™ system).
A. W. Perkins Mini Medusa
Learn More
A. W. Perkins Mini Medusa

For soot and flaky creosote in smaller than 7" flues.
Use the following combinaton for cleaning smoke pipe:
2 AWP7163 Rods,
1 AWP2730 Missile Whip and 1 AWP2715 drill adapter
Missile Whip with 2 strands of 10" .155" whip material. Works great on smoke pipe.
A. W. Perkins Round Wire Brushes
Learn More
A. W. Perkins Round Wire Brushes

The 22ga round wire is twisted, providing an aggressive brush, available in three shapes.
Use these adapters to attach your threaded and round wire brushes to BL rods:
  • Round Wire = AWP2238
  • Flat Wire = AWP2238
  • Sweeps All Brush = AWP2210
  • Poly = AWP2238
A. W. Perkins Flat Wire Brushes
Learn More
A. W. Perkins Flat Wire Brushes

Flat, galvanized wire provides aggressive cleaning, available in three shapes.
A. W. Perkins Buttonflex Brushes
Learn More
A. W. Perkins Buttonflex Brushes

Use the brush to clean loose soot from wood, coal and oil flues or for cleaning dampers of zero-clearance fireplaces. This brush has a distinct wood center and floppy bristles. (Sweeps All Brush has threaded connection; ButtonFlex Brush has the ButtonLok™.)
A. W. Perkins Round Poly Brushes
Learn More
A. W. Perkins Round Poly Brushes

Stiff black polypropylene bristles make it resistant to acids in coal, gas, and oil. Use less aggressive .050" medium poly for use on zero clearance fireplaces.
A. W. Perkins Smoke Chamber Brushes
Learn More
A. W. Perkins Smoke Chamber Brushes

This "designed for spinning" wood center brush with 8" long bristles stick nearly straight out when at rest. When spun on the ButtonFlex rods, the 8" strands fan out to reach corners of the smoke chamber. Reverse to walk brush back and forth. Available with yellow .040" bristles and stiffer black .055" bristles.
A. W. Perkins Wood Center Brushes
Learn More
A. W. Perkins Wood Center Brushes

This brush is used to quickly sweep soot and loose debris in fireplace and oil flues. The rounded nose on the wood center with short brush height makes for a very maneuverable brush that navigates offsets with ease. It has a universal female thread.
A. W. Perkins Round Duct Brush
Learn More
A. W. Perkins Round Duct Brush

This brush is used to quickly sweep soot and loose debris in fireplace and oil flues. The rounded nose on the wood center with short brush height makes for a very maneuverable brush that navigates offsets with ease. It has a universal female thread.
A. W. Perkins Counter Duster Brush
Call 1.800.997.8481
A. W. Perkins Wood Handle Wire Duster Brush
Call 1.800.997.8481
A. W. Perkins Rotary Brush Kit
Learn More
A. W. Perkins Rotary Brush Kit

This dryer vent kit comes in a 3’ hard, closed top rod caddy. The 25’ kit contains 8 - 5/16" diameter x 3 ft rods, starter rod, drill adapter, and 4" brush with a 10" spring leader rod. The 35’ kit includes 6 - 5/16" diameter and 3/8" rods, starter rod, and 4" brush with spring leader.
Rutland Master Sweep™ Round Wire Brushes
Learn More
Rutland Master Sweep™ Round Wire Brushes

Master Sweep™ Chimney brushes have a heavy duty double spiral 0.177 spindle design and 7" of fill of two-on-two high density oil tempered 22 gauge wire bristles, creating uniform rugged bristle distribution. Available with 3/8" NPT or Torque Lock Connection.
Rutland Master Sweep™ Flat Wire Brushes
Learn More
Rutland Master Sweep™ Flat Wire Brushes

Made for top-down sweeping from the roof. Use with TSR for removing third stage creosote. The brush filament is flat galvanized wire, has same spindle construction as brush above. Available with 3/8" NPT or Torque Lock Connector.
Note: Bristles will not spring back to their original shape if they are jammed past a damper frame.
Rutland Round Poly Pro Chimney Brushes
Learn More
Rutland Round Poly Pro Chimney Brushes

Designed with the professional in mind for cleaning insulated metal chimneys, stainless steel or metal stove pipes. These long-lasting, sturdy poly brushes have 7" of fill and are acid resistant. 0.075" poly filament or less aggressive .050" medium poly (for use with zero clearance fireplaces). Available with 3/8" NPT or Torque Lock connectors.
Rutland SweepsAll™ Brushes
Learn More
Rutland SweepsAll™ Brushes

SweepsAll™ Brushes have tough acid resistant nylon bristles for use on masonry or metal flues. The brushes are especially suited to cleaning offset chimneys and flues relined with M-Flex pipe where creosote is not a problem. Soft floppy bristles allow the brush, regardless of size, to fit most standard flues and will not damage or score liners. Brushes have Torque Lock Connectors. Use these brushes with ProFlex™ rods.
Rutland Noodle Brush
Learn More
Rutland Noodle Brush

This flexible handled brush can be bent for cleaning smoke chambers, heat tubes, and pellet stove heat exchangers.
Rutland Pellet Stove Brushes
Learn More
Rutland Pellet Stove Brushes

made with poly bristles, heavy duty ball tip guides brushes through narrow offsets and bends. 1/4"-20 thread, use with 25P5 rod.
Rutland Cyclone Smoke Chamber Brush
Learn More
Rutland Cyclone Smoke Chamber Brush

An excellent brush for cleaning Smoke chambers. The bristles are 11" long and when used with a ProKleen™ drill and rod system, they spread out and clean efficiently. Torque Lock connector, use with ProFlex™ rods.
Rutland Pellet Stove and Dryer Vent Brush Assembly
Learn More
Rutland Pellet Stove and Dryer Vent Brush Assembly

Designed to clean both pellet stove vents and dryer vents. Brushes can easily navigate a sharp turning radius without getting caught in elbows. Brush filament is 0.020" poly. 20' attached flexible handle/rod for very light cleanings.
The Wizard System
Learn More
The Wizard System

Unique patented rotary action safely and effectively removes thin layers of accumulated glazed creosote and crust. The loops wipe the sides and corners of clay flue tiles to remove buildup. It gets down to the liner in minutes. It also scores heavier concentrations of surface glaze for faster penetration of liquid creosote remover treatments.

Brush Accessories

A. W. Perkins Guide Ball
Call 1.800.997.8481
A. W. Perkins Noise Maker
Call 1.800.997.8481
A. W. Perkins Double Worm Screw
Learn More
A. W. Perkins Double Worm Screw

Use this for destroying or removing unwanted bird nests and large accumulations of soot found in chimneys.
A. W. Perkins Scrapers
Learn More
A. W. Perkins Scrapers

Half-Round Hinged Scraper designed to clean soot and creosote, fallen bricks and mortar pieces, as well as free blockage-like accumulations in hard-to-reach corners.
A. W. Perkins Harpoon
Learn More
A. W. Perkins Harpoon

Another way to remove foreign objects, as well as for chipping away tough glaze build up.
A. W. Perkins Boring Tool
Learn More
A. W. Perkins Boring Tool

Can be used to help with flue tile removal. Provides heavy impact for penetrating stubborn obstructions.
A. W. Perkins Retrieval Tool
Learn More
A. W. Perkins Retrieval Tool

This heavy-duty tool is bent with a 3/4 rotation to allow it to be rotated into obstructions or debris to help break them up. It's also handy when attempting to retrieve brushes lodged in the flue.
A. W. Perkins Chisel
Learn More
A. W. Perkins Chisel

A heavy duty 3/4" wide chisel useful when removing flue tiles or attempting to clean mortar "slush" after tile is broken out.
A. W. Perkins Glaze Removal Chain
Learn More
A. W. Perkins Glaze Removal Chain

Rugged chain securely attached to our solid steel ButtonLok™ Adapter and Hub. Attach to Enforcer™ rods to spin away creosote–even glaze deposits.
A. W. Perkins Creosote Removing Chains
Learn More
A. W. Perkins Creosote Removing Chains

Removes creosote by spinning in masonry or heavy wall stainless liners. The traditional chain whip with small round button connector. It's compatible with AWP and AWP rods.

Cleaning Systems

Wohler USA Viper Chimney Cleaning System Regular Viper
Learn More
Wohler USA Viper Chimney Cleaning System Regular Viper

The Viper is the ideal way to clean prefab or medium to large chimneys. Weighs only 12 lbs. Simply uncoil or retract the 50’ or 65’ rod.
Wohler USA Viper Chimney Cleaning System Handy Viper
Learn More
Wohler USA Viper Chimney Cleaning System Handy Viper

The Viper is the ideal way to clean prefab or medium to large chimneys. The Handy Viper is a smaller version, at only 4 lbs. You can clip it onto your belt. This is a great way to clean those small to medium sized chimneys. The Handy Viper comes with a 50’ cable.
Wohler USA Viper Chimney Cleaning System Mini Viper
Learn More
Wohler USA Viper Chimney Cleaning System Mini Viper

The Viper is the ideal way to clean prefab or medium to large chimneys. The Mini Viper has 50’, 4.5 mm dia. rod, and comes with a folding handle and belt clip and weighs just 2.5 lbs.

Cleaning Systems Accessories

Wohler USA Viper Chimney Cleaning System Dome Brush
Learn More
Wohler USA Viper Chimney Cleaning System Dome Brush

Use this nylon perlon brush to clean any of our stainless steel liners. It has an M10 thread which adapts to the large viper.
Wohler USA Viper Chimney Cleaning System Threaded Brush
Learn More
Wohler USA Viper Chimney Cleaning System Threaded Brush (Order brush 2" larger than flue)

There are three main types: PEK brush, poly perlon brush with nylon bristles, and spring-steel flat wire. The items with the M5 thread are for use with the mini viper. The M10 thread is for the large viper, handy viper, and small viper. The only M5 thread brush is a PEK brush which can be used for any of our stainless steel liners, pre-fab chimneys, dryer vent, or duct cleaning. M5 thread is for MiniViper only. The M10 threaded brushes for the large, small, and handy viper are available in all three types. The PEK and poly perlon are great for cleaning stainless steel liners, pre-fab chimneys, dryer vents, and ducts. The Spring-Steel Flat Wire threaded brush (M10 thread) is for cleaning clay flue tile or masonry chimneys.
Wohler USA Viper Chimney Cleaning System Stars
Learn More
Wohler USA Viper Chimney Cleaning System Stars

With a universal opening for all vipers, this is used to clean creosote build-up. Available in VA crimped stainless steel wire, PEK, and perlon bristles. The VA crimped star has "wavy" stainless wire bristles; therefore, it is not recommended for use on stainless steel liners. PEK and perlon stars are made of a rigid plastic material.
Replacement Knob & Spring
Call 1.800.997.8481
Repair Kit for Viper
Call 1.800.997.8481
Viper Adapter UJ to Male 10mm
Call 1.800.997.8481

Inspection Cameras

Pro-Scan "Pan & Tilt" Video Inspection System with DVR
Learn More
Pro-Scan "Pan & Tilt" Video Inspection System with DVR

HY-C is proud to introduce the new Pro-Scan "Pan & Tilt" Video Inspection System. Utilizing advanced technology and rugged construction, this system is ideal for use in chimneys and air ducts. The camera will pan 360° continuously in either direction without stopping and tilt 180° for full range of view. The system includes: DVR recording and photo capture function with easy file transferand rechargeable Li-ion battery pack for portabie camera holders that allow for inspection of vertical, horizontal or offset flues. The included keyboard allows for overlay of text onto your videos or photos while separate folders can be created and organized on the 8" monitor. The camera is constructed of aircraft aluminum and features auto focus/auto iris with high intensity LED adjustable lighting control to produce maximum quality images.

The Pro-Scan "Pan & Tilt" Video Inspection System by HY-C provides professional, high quality results at a very competitive price.
Product Features:
  • 8" TFT LCD Monitor
  • Color camera w/aircraft aluminum body (s/s upgrade available.)
  • Auto focus/auto iris
  • 360° Pan (endless rotation) - 180° tilt
  • Camera lens window made of durable sapphire glass
  • Dustproof & waterproof
  • High intensity, white LED adjustable lighting
  • DVR Recording w/capture for photos (SD card included)
  • Keyboard for text overlay
  • 12V Li-ion battery pack (8 hr. run time; 4400mA)
  • Camera holder w/adjustable centering (fits most rods)
  • 100 ft. cable reel
  • Rugged carrying case
  • 1-Year Limited Warranty
Pro-Scan Video Inspection System with DVR
Learn More
Pro-Scan Video Inspection System with DVR

The Pro-Scan Video Inspection System by HY-C utilizes advanced technology, compact design and rugged construction for use in chimneys, dryer vents and air ducts. The system includes DVR recording and photo capture function with easy file transfer and rechargeable Li-ion battery pack for portability and camera holders that allow for inspection of vertical, horizontal, offsets or limited access areas. The stainless steel color camera is equipped with 12 high-intensity LED’s and adjustable lighting control to produce the highest quality images.

Pro-Scan combines the versatility you need with the professional look and results your customers expect. Product Features:
  • 8" TFT LCD Monitor
  • Stainless steel color mini camera (0.90" dia. X 1.77" L)
  • Auto focus/auto iris
  • Camera lens window made of durable sapphire glass
  • Dustproof & waterproof
  • 12 High-intensity white LED’s – adjustable lighting
  • DVR Recording w/capture for photos
  • 12V Li-ion battery pack (8 hr. run time)(4400mA)
  • 100 ft. cable reel
  • Carrying case
  • 1-Year Limited Warranty
The Mad Hatter 20/20 Video Inspection Camera
Learn More
The Mad Hatter 20/20 Video Inspection Camera

  • Rugged water and air tight molded polypropylene case.
  • 7" TFT-LCD active matrix monitor, 16:9 wide screen display.
  • 700 line resolution auto focus, auto iris camera.
  • 4 super bright LED camera head lighting with adjustable light output.
  • Internal high quality power supply.
  • 50’ 18/4 rubber cased wire, 1 video output jack.
  • Optional DVR recorder for recording still picture to an SD card.
  • 1-year warranty against defects.
VIS400 Professional Video Inspection System
Learn More
VIS400 Professional Video Inspection System

Perfect for inspections while on the roof. Very bright LED lighting-selectable. Compact and easy to use, Weighs just 3 lbs. Includes carry strap and protective pouch with anti-glare protection.
Lindemann SmartScan
Learn More
Lindemann SmartScan

  • SmartScan Case easily attaches to your existing rods.
  • Download the App using your Apple/Android Smartphone and install your phone inside the SmartScan Case.
  • Your phone wirelessly connects to your iPad/Tablet for fast image viewing, photos and video.
Flash-Corder™
Learn More
Flash-Corder™

3.7 V Li-ion battery (included) charges in 4 hours with a running time of up to 3 hours. A/C charger included. Rugged aluminum housing is splash and dust resistant for daily use by chimney sweeps and service professionals for video documentation. USB 2.0 connector is sealed to protect it inside and outside the unit, cable included. For use in temperatures between 10° and 120° F. Compact size at 8" L x 2 ¼" Dia., lightweight at 9 oz.

Flashlight features:
  • Spot and Flood light settings plus emergency flash
  • (3) LED’s with 100 lumen brightness
  • Use Flood setting for close-up video up to 5" distance
  • Use Spot setting for distance viewing/video.
Video Recording features:
  • Date and Time stamped video
  • Saves MP4 files up to 30 min. long
  • Audio option
  • Auto focus down to 1"
  • 4GB card sealed for protection
Flash-Corder™ Holder
Learn More
Flash-Corder™ Holder

Aluminum frame with large Buttonlok™ female connector. Allows use of Buttonlok™ chimney rods to push the Flash-Corder™ up or down the chimney. Threaded bezel protects leading edge of Flash-Corder™.

Tools

National Chimney Tile Breaker
Learn More
National Chimney Tile Breaker

This tile breaker tool removes rectangle or square flue tiles faster and easier than any other tool on the market today. Available for ButtonLok™, ProKleen and Torque Lock style rods. (This tool does not work on round flues.)
Rutland Tile Breaker with TLC
Learn More
Rutland Tile Breaker with TLC

When attached to ProKleen™ steel rods, powered by a 1/2" electric drill, these weighted tools spin in concentric circles to break out clay flue tiles quickly and efficiently.
A. W. Perkins Tile Breaker
Learn More
A. W. Perkins Tile Breaker

A. W. Perkins Steel Plate Tile Breaker with ButtonLok™ connector comes in three sizes:
small 4 X 4
rectangle 4 X 6
heavy duty double 4 X 4.
A. W. Perkins PterodacTILE Tile Extractor
Learn More
A. W. Perkins PterodacTILE Tile Extractor

Use to remove tiles that have minimal mortar slush OR to remove large pieces of tiles, blocking, etc. An indispensable tool for those who break lots of tiles. ButtonLok double connector works with existing ButtonLok rods. Extremely tough jaw material grips top of tiles and closes easily to grip tiles, blocking, bricks, etc. In testing over 500 lbs was lifted with this tool! Replaceable urethane coated jaws grip tightly. Winch connector allows attachment of winch to assist during heavy lifts. Use to reset tiles that have to be replaced near the exit due to weathering when relining is not needed.
PterdacTILE Mini-T Tile Extractor
Learn More
PterdacTILE Mini-T Tile Extractor

Lighter weight tool to be used in conjunction with our Large T1, jaws open wide to grab objects up to 4" across, cast aluminum body is lighter for better control when way down the chimney, replaceable polyurethane coated jaws, two operation modes allows precise control to pick up very small objects or full tiles, including round tiles. ButtonLok double connector works with existing ButtonLok Rods. Replaceable urethane coated jaws grip tightly. Swivel winch connector allows attachment of winch to assist heavy lifts.
Chamber Ease
Learn More
Chamber Ease

National Chimney's Chamber Ease is a tool to scrape debris off hard-toreach smoke shelves.
Inspection Mirror
Learn More
Inspection Mirror

Choose from one of these great mirrors to assist in seeing obstructions or off sets in the chimney.
  • Regular Handle Mirror: 21/8" x 31/2", length 111/4", extends to 151/4"
  • Long Handle Mirror: 21/8" x 31/2", length 171/4", extends to 271/2"
Wohler Mirror
Learn More
Wohler Mirror

Wohler Mirror: 3"x 6", 8" Long extends to 40"
Ahrens Quick Set Scaffold
Learn More
Ahrens Quick Set Scaffold

This Quick Set scaffold provides a safe place to work. Set it up as a work platform or build a catwalk across the roof for a walkway. It has a 750 lb. load rating and adjusts up to a 12/12 pitch. Set includes: (2) adj. platform supports with brackets, (2) roof hooks with padded feet, and (2) chains (20 ft ea.) with hardware.
Chimney Bracket
Learn More
Chimney Bracket

Serves as a "starter" platform to level off sloped roof so 5’ wide scaffold frames can be erected around chimney construction or chimney repairs. It is adjustable to most roof angles. Chimney Bracket includes: (2) brackets and (1) B74 brace. Can be used with Ultimate Ridge Hooks.
Ridge Hooks
Learn More
Ridge Hooks

These hooks fit any ladder with 12" rungs and secures it over the ridge of the roof. Available with wheels (rolling) or without (flat). Ridge Hooks can help minimize the chance of damaging your customer’s roof and provide safe climbing. Price is for a single hook.
Ultimate Ridge Hook
Learn More
Ultimate Ridge Hook

Ultimate Ridge Hooks are a pair of reversible, adjustable, steel brackets that straddle the roof ridge and allow you, via 2 x 8 base planks, to attach chimney/roof brackets or custom built stage on either or both sides of the ridge - without any roof penetrations. Made of powder coated, 14ga steel. Ultimate Ridge Hooks are rated for 1,750 lbs. on a 12 pitch roof. All hardware and a set-up guide included. A YouTube video is on the website: Ultimateridgehook.com.
Hoist Arm and Wheel
Learn More
Hoist Arm and Wheel

Hook the 12" diameter wheel onto the tubular framed hoist arm. The hook is equipped with a safety latch and entire assembly is zinc plated for rust protection. Use a maximum rope diameter of 1". We stock ropes with hook in 3/4" diameter x 60 ft or 100 ft length. (All sold separately.)
Ladder Levelers Xtenda-Leg™
Learn More
Ladder Levelers Xtenda-Leg™

Essential for working safely on uneven surfaces. Level a ladder in seconds with unlimited adjustment positions. Simply squeeze spring loaded locking plates, then allow the leg to extend or retract. Optional replacement feet kit contains (2) rubber feet, (2) metal locking caps and screws.
Barger Clean Sweep Insert Puller
Learn More
Barger Clean Sweep Insert Puller

Insert Pullers are being used by chimney professionals across the country for their day-to-day operations. Removing a fireplace insert is strenuous work that may require more than one person. With a Clean Sweep Insert Puller, it’s an easy one man job.
To use, simply adjust the puller to the height of the hearth extension using the adjustable legs. The legs will allow adjustment from the floor to 17" high. Once in place, slide the insert onto the rolling platform, and roll it back out of your way.
The Clean Sweep Insert Puller features solid construction with replaceable roller bearings that ensures it will last for many years. It’s rated at an 800 lb. capacity, yet only weighs 27 lbs. The puller measures 18" wide, 49.5" long, 2 ½" high, and the legs store within the frame. The Clean Sweep Insert Puller is easy to carry and stores easily in your service truck.

Specifications:
  • Overall Width: 18"
  • Overall Length: 49.5"
  • Legs: 16"
  • Weight: 27 lbs
  • Adjustment: From floor to 17" high
  • Capacity: 800 lbs
Rolling platform has full travel of the frame and is removable for bearing replacement. Legs are fully universal and store within the frame of the puller. Frame rails and rolling platform are angled at the end for sliding under insert.
DrySafer Lint Alarm
Learn More
DrySafer Lint Alarm

Detect dangerous lint build up before it causes damage, potential injury, or death.
When a dryer's airflow becomes restricted because of excessive lint build up, it can cause the dryer to overheat and possibly result in a fire.
DrySafer Dryer Lint Alarm checks insufficient airflow inside the dryer's exhaust ducts and internal lint filter housing.
Arbortech AS170 Brick + Mortar Saw
Learn More
Arbortech AS170 Brick + Mortar Saw

Use this powerful 13 Amp saw for head joint restoration, masonry repair, brick removal and repair, mortar repair, mortar removal and renovation. Dust resistant heavy duty design ensures long motor life even in the toughest working environments.
  • Cuts square opening with no over cutting. Surrounding brickwork can remain untouched.
  • Able to cut to a depth of 4 ¾".
  • Safe cutting action prevents kickback and is easy to control.
  • Use to cut directly into flush walls without stitch drilling.
  • Creates very little dust, and has dust boot with vacuum attachment.
  • Forward facing blades allow clear visibility when cutting.
  • Auto cut-off brushes prevent motor damage.
  • Blade’s tungsten carbide teeth can be re-sharpened.
  • Weight: 9.5 lbs.
Saw comes with: (1) preach of General Purpose blades, Plunge blades and head joint blades, torque key, set of extra blade bolts, vacuum adapter, spare belt and heavy duty storage bag.